(Measure your Main Shaft before ordering please)
Shipping is $5 flat rate to the continental US (FREE for orders of $40 and more!)
Shipping is
$15 flat rate for the
rest of the world. (FREE for orders of $150 and
more!)
Currently
Available Products
Swash Leveling Zip Tools (The Swishy Thing)
Swash Leveling Tripod Tools (For those that don't like bacon)
Under Swash Leveling Tools (USLT)
These tools allows you to
level your swash
plate WITHOUT removing the head. Clip it onto the main shaft just
over or under the swash plate and it provides a level surface to use
as a reference while leveling your swash. This CNC milled tool is
extremely accurate. Customers describe these as a "Must Have"
tool in your field box. Polycarbonate tool will not scratch your
heli.
(Measure your Main Shaft before ordering please)
These tools allow you to precisely level your swash plate by aligning all three links at once. (Inspired by Helifreak fiddle)
Slide the tool over the main shaft above the swash plate and it provides a level surface to use as a reference while leveling your swash. Place one of the tools feet over each swash linkage. It can touch the swash itself or the swash linkage as long as they provide a level plane parallel with the swash. This 3D printed tool is designed to precise specifications and allows you to level your swash to a high degree of accuracy.
The universal version is made with wide feet that will work "as is" on many helis, but it can easily be modified to level most swashes. If necessary, use a hack saw, file, or other cutting device to easily notch out sections that interfere with tool usage. This tool can be used on most swashes of a given main shaft size. I will add new sizes apon request at rick@rdlohr.com.
The
specific versions, Oxy5 and Logo 700, were made for particular helis by
special request, but they will also work on swash plates with similar
sizes and configuration. I'm less likely to add a tool for a
heli I
don't own because it takes specific measurements to make these.
I can however be bribed with scotch and good pictures with
measurements.
Customers that don't like bacon describe these as a "Must Have" tool in your home setup arsenal. Non-metal tool will not scratch your heli.
(Measure your Main Shaft before ordering please)
Universal Tool (Notice the large feet)
These tools make it easy to
align servo horns
at 90 degrees on your servos. With the shape of many horns, it's
difficult to eyeball it perfectly without the help of a tool.
Polycarbonate tool won’t scratch your paint. Some servos may
require extra washers/screws to mount (not included).
These spacers allow you to stabilize your servos securely without the stock rubber grommets. They are each CNC milled to exact specifications to match your servos and screws. Select a size to match your servo width, distance between holes, and hole width. Then choose what size screws you want to use. They come in 4, 4.5 and 5mm servo hole sizes with inner holes for 2, 2.5 and 3mm screw sizes. They come with two holes to match most servo types (two spacers to a package) or a single hole to match any servo (four spacers to a package).
This tool mounts on top the head and locks the blade grips at zero pitch to allow easy adjustment of links. This tool will work for most 250 to 450 size heads with flat topped blade grips and tee. (Inspired by Helifreaks Finless and Mercuriell) Polycarbonate tool won’t scratch your paint. Some heads may require extra washers/screws to mount (not included).
Finless video showing how it is used
$17 USD
This tool mounts on top the head and locks the blade grips at zero pitch to allow easy adjustment of links. This tool will work for most 500 to 700 size heads with flat topped blade grips and tee. (Inspired by Helifreaks Finless and Mercuriell) Polycarbonate tool won’t scratch your paint. Some heads may require extra washers/screws to mount (not included).
Finless video showing how it is use
$23 USD
$35 USD
These tool mounts on top the head and locks the blade grips at zero pitch to allow easy adjustment of links. Blades can be on or off. Polycarbonate tool won't scratch your paint.
Finless video showing how a zero pitch tool is used:
These tools allows you to
level your swash
plate WITHOUT removing the head. Clip it onto the main shaft just
under or over the swash plate and it provides a level surface to use
as a reference while leveling your swash. Polycarbonate tool will not
scratch your heli. (Tools 5mm and under require no screws and
don't come with them)
(Measure your Main Shaft before ordering
please)
These tool mounts on top the head to provide a level reference for your pitch gauge to allow accurate blade pitch adjustments on Flybarless heads. A TREX 450 Flybar is used as reference bar (not included). Polycarbonate tool won't scratch your paint.
$16 USD
$16 USD
These mounts provide an additional rigid mounting surface for your gyro, receiver, or both. (Inspired by ChasHeliCop, caralmar and Steven Bales). They are made of high quality polycarbonate and machined to proper dimensions. They comes with four M2x8 screws included.
$15 USD
These are light weight non-conductive mounting surfaces that allow optimum placement of your satellite receiver units for best radio reception in all helicopter orientations. Proper satellite placement assures that the conductive CF surfaces of the heli do not block the transmitter signal to your antennas. Made of high quality polycarbonate and machined to proper dimensions. (new thicker rear mount)
This mount provides a light weight, vibration isolated, rigid mounting surface for your Flybarless 3-n-1 Control Unit. Used in conjunction with high quality gyro mounting tape (not included), it will shield your control unit from vibrations. (Inspired by Helifreak SYMAWD). It is made of high quality polycarbonate and machined to proper dimensions. Mounts with stock mounting screws.
Recommended Mounting Tape: FUTM4669 - 2x22x22mm (Fits without cutting)
$15 USD
This is the device that started it all. It allows you to mount your gyro inverted to protect it against blade or paddle strikes. (Inspired by Helifreak Finless Bob White). It is made of high quality polycarbonate and machined to proper dimensions. This is for metal boom blocks ONLY! If you have a plastic boom block see the SA mount.
$14 USD
T-REX 450 SA Inverted Gyro Mount
This device allows you to mount your gyro inverted to protect it against blade or paddle strikes. It is made of high quality polycarbonate and machined to proper dimensions. This is for the XL Carbon Frame upgrade with the plastic boom block or the SA which has a plastic boom block.
$8 USD
This device allows you to mount your gyro inverted to protect it against blade or paddle strikes. It is made of high quality polycarbonate and machined to proper dimensions.
$14 USD
This device allows you to mount your gyro inverted to protect it against blade or paddle strikes. It is made of high quality polycarbonate and machined to proper dimensions.
$15 USD
This device allows you to mount your gyro inverted to protect it against blade or paddle strikes. It is made of high quality polycarbonate and machined to proper dimensions. It comes with high strength mounting tape.
$15 USD
This mount gives you more room for mounting your receiver and/or your gyro. (Inspired by Helifreak user BuzzKill). It is made of high quality polycarbonate and machined to proper dimensions. It mounts with the hardware that came with your 200.
$16 USD
These mounts provides a rigid mounting surface for your gyro or receiver on BobOD's Ultimate frames. (Designed by Helifreak BobOD). It is made of high quality polycarbonate and machined to proper dimensions.
These mount provides a secure
but flexible
mounting surface for your battery.
(Inspired by Helifreak
copterklutz, chuckk & horsefeetky). It is made of high quality
polycarbonate and machined to proper dimensions.
$14 USD
(Includes two M2x8 and two M2x16 screws)
$17 USD
(Includes four M2x8 screws)
$15 USD
(Includes four M2x8 screws)
$17 USD
This tool locks your flybar firmly in place while you adjust your pitch ranges. It is adjustable to fit TREX 450 series and similar heads. Adjust it for your 450 head making it snug without flexing the legs. Adjust once, then reuse over and over.
Great for clone heads. Polycarbonate tool won’t scratch your paint.
$16 USD
This tool locks your flybar firmly in place while you adjust your pitch ranges. It is adjustable to fit TREX 500 series and similar heads. Adjust it for your 500 head making it snug without flexing the legs. Adjust once, then reuse over and over.
Great for clone heads. Polycarbonate tool won’t scratch your paint.
$23 USD
Flybar Locks: These tools lock your flybar firmly in place while you adjust your pitch ranges. Polycarbonate tool won’t scratch your paint. Described as a “must have” for your tool box by customers.
$10 USD
$15 USD
$17 USD
$15 USD
This Flybar lock is for the early 600s with plastic or the original metal seesaw similar to the green seesaw in the picture above. It is not for the later ESP model with the thinner metal seesaw shown in black. This lock has is made from extra thick 3/16” polycarbonate.
$17 USD
This Flybar lock is for 600 ESPs and 600s with the lighter metal seesaw. This type of seesaw has a bulge in the middle around the bearing then the rest is thinner like the black seesaw in the picture below. This lock has is made from extra thick 3/16” polycarbonate. You’re gonna love it!
$17 USD
This Flybar lock is for some of the newer 600 ESPs that require a shorter lock. Use the following guide to decide which lock is right for you.
$17 USD
$17 USD
Make it easy to see the orientation of your night heli with these high quality polycarbonate fins specially designed with a slot for cold light strings. (Light strings not included)
$22 USD
Make it easy to see the orientation of your night heli with these high quality polycarbonate fins specially designed with a slot for cold light strings. (Light strings not included)
$22 USD
Stop breaking your stock fins and tail blades. These polycarbonate fins are sturdier than the stock CF fins, and they are longer to better protect your tail blades. Both the Horizontal and Vertical fins come pre-drilled and ready to install. Longer screws may be required.
$19 USD
$17 USD
All products are Copyright © 2006 - 2022 RDLohr’s Clearly Superior Products. All rights reserved.
